Supported devices

The following devices have been tested and confirmed as working. If your device is unlisted but working, please open a pull request to update the list and add a fixture file (use python -m devtools.dump_devinfo to generate one).

[!NOTE] The hub attached Tapo buttons S200B and S200D do not currently support alerting when the button is pressed.

[!NOTE] Some firmware versions of Tapo Cameras will not authenticate unless you enable “Tapo Lab” > “Third-Party Compatibility” in the native Tapo app. Alternatively, you can factory reset and then prevent the device from accessing the internet.

Kasa devices

Some newer Kasa devices require authentication. These are marked with [1] in the list below.
Hub-Connected Devices may work across TAPO/KASA branded hubs even if they don’t work across the native apps.

Plugs

EP10
- Hardware: 1.0 (US) / Firmware: 1.0.2
EP25
- Hardware: 2.6 (US) / Firmware: 1.0.1[1]
- Hardware: 2.6 (US) / Firmware: 1.0.2[1]
HS100
- Hardware: 1.0 (UK) / Firmware: 1.2.6
- Hardware: 4.1 (UK) / Firmware: 1.1.0[1]
- Hardware: 1.0 (US) / Firmware: 1.2.5
- Hardware: 2.0 (US) / Firmware: 1.5.6
HS103
- Hardware: 1.0 (US) / Firmware: 1.5.7
- Hardware: 2.1 (US) / Firmware: 1.1.2
- Hardware: 2.1 (US) / Firmware: 1.1.4
HS105
- Hardware: 1.0 (US) / Firmware: 1.5.6
HS110
- Hardware: 1.0 (EU) / Firmware: 1.2.5
- Hardware: 4.0 (EU) / Firmware: 1.0.4
- Hardware: 1.0 (US) / Firmware: 1.2.6
KP100
- Hardware: 3.0 (US) / Firmware: 1.0.1
KP105
- Hardware: 1.0 (UK) / Firmware: 1.0.5
- Hardware: 1.0 (UK) / Firmware: 1.0.7
KP115
- Hardware: 1.0 (EU) / Firmware: 1.0.16
- Hardware: 1.0 (US) / Firmware: 1.0.17
- Hardware: 1.0 (US) / Firmware: 1.0.21
KP125
- Hardware: 1.0 (US) / Firmware: 1.0.6
KP125M
- Hardware: 1.0 (US) / Firmware: 1.1.3[1]
- Hardware: 1.0 (US) / Firmware: 1.2.3[1]
KP401
- Hardware: 1.0 (US) / Firmware: 1.0.0

Power Strips

EP40
- Hardware: 1.0 (US) / Firmware: 1.0.2
EP40M
- Hardware: 1.0 (US) / Firmware: 1.1.0[1]
HS107
- Hardware: 1.0 (US) / Firmware: 1.0.8
HS300
- Hardware: 1.0 (US) / Firmware: 1.0.10
- Hardware: 1.0 (US) / Firmware: 1.0.21
- Hardware: 2.0 (US) / Firmware: 1.0.12
- Hardware: 2.0 (US) / Firmware: 1.0.3
KP200
- Hardware: 3.0 (US) / Firmware: 1.0.3
KP303
- Hardware: 1.0 (UK) / Firmware: 1.0.3
- Hardware: 2.0 (US) / Firmware: 1.0.3
- Hardware: 2.0 (US) / Firmware: 1.0.9
KP400
- Hardware: 1.0 (US) / Firmware: 1.0.10
- Hardware: 2.0 (US) / Firmware: 1.0.6
- Hardware: 3.0 (US) / Firmware: 1.0.3
- Hardware: 3.0 (US) / Firmware: 1.0.4

Wall Switches

ES20M
- Hardware: 1.0 (US) / Firmware: 1.0.11
- Hardware: 1.0 (US) / Firmware: 1.0.8
HS200
- Hardware: 2.0 (US) / Firmware: 1.5.7
- Hardware: 3.0 (US) / Firmware: 1.1.5
- Hardware: 5.0 (US) / Firmware: 1.0.11
- Hardware: 5.0 (US) / Firmware: 1.0.2
- Hardware: 5.26 (US) / Firmware: 1.0.3[1]
HS210
- Hardware: 1.0 (US) / Firmware: 1.5.8
- Hardware: 2.0 (US) / Firmware: 1.1.5
- Hardware: 3.0 (US) / Firmware: 1.0.10
HS220
- Hardware: 1.0 (US) / Firmware: 1.5.7
- Hardware: 2.0 (US) / Firmware: 1.0.3
- Hardware: 3.26 (US) / Firmware: 1.0.1[1]
KP405
- Hardware: 1.0 (US) / Firmware: 1.0.5
- Hardware: 1.0 (US) / Firmware: 1.0.6
KS200
- Hardware: 1.0 (US) / Firmware: 1.0.8
KS200M
- Hardware: 1.0 (US) / Firmware: 1.0.10
- Hardware: 1.0 (US) / Firmware: 1.0.11
- Hardware: 1.0 (US) / Firmware: 1.0.12
- Hardware: 1.0 (US) / Firmware: 1.0.8
KS205
- Hardware: 1.0 (US) / Firmware: 1.0.2[1]
- Hardware: 1.0 (US) / Firmware: 1.1.0[1]
KS220
- Hardware: 1.0 (US) / Firmware: 1.0.13
KS220M
- Hardware: 1.0 (US) / Firmware: 1.0.4
KS225
- Hardware: 1.0 (US) / Firmware: 1.0.2[1]
- Hardware: 1.0 (US) / Firmware: 1.1.0[1]
KS230
- Hardware: 1.0 (US) / Firmware: 1.0.14
- Hardware: 2.0 (US) / Firmware: 1.0.11
KS240
- Hardware: 1.0 (US) / Firmware: 1.0.4[1]
- Hardware: 1.0 (US) / Firmware: 1.0.5[1]
- Hardware: 1.0 (US) / Firmware: 1.0.7[1]

Bulbs

KL110
- Hardware: 1.0 (US) / Firmware: 1.8.11
KL120
- Hardware: 1.0 (US) / Firmware: 1.8.11
- Hardware: 1.0 (US) / Firmware: 1.8.6
KL125
- Hardware: 1.20 (US) / Firmware: 1.0.5
- Hardware: 2.0 (US) / Firmware: 1.0.7
- Hardware: 4.0 (US) / Firmware: 1.0.5
KL130
- Hardware: 1.0 (EU) / Firmware: 1.8.8
- Hardware: 1.0 (US) / Firmware: 1.8.11
KL135
- Hardware: 1.0 (US) / Firmware: 1.0.15
- Hardware: 1.0 (US) / Firmware: 1.0.6
KL50
- Hardware: 1.0 (US) / Firmware: 1.1.13
KL60
- Hardware: 1.0 (UN) / Firmware: 1.1.4
- Hardware: 1.0 (US) / Firmware: 1.1.13
LB110
- Hardware: 1.0 (US) / Firmware: 1.8.11

Light Strips

KL400L5
- Hardware: 1.0 (US) / Firmware: 1.0.5
- Hardware: 1.0 (US) / Firmware: 1.0.8
KL420L5
- Hardware: 1.0 (US) / Firmware: 1.0.2
KL430
- Hardware: 2.0 (UN) / Firmware: 1.0.8
- Hardware: 1.0 (US) / Firmware: 1.0.10
- Hardware: 2.0 (US) / Firmware: 1.0.11
- Hardware: 2.0 (US) / Firmware: 1.0.8
- Hardware: 2.0 (US) / Firmware: 1.0.9

Hubs

KH100
- Hardware: 1.0 (EU) / Firmware: 1.2.3[1]
- Hardware: 1.0 (EU) / Firmware: 1.5.12[1]
- Hardware: 1.0 (UK) / Firmware: 1.5.6[1]

Hub-Connected Devices

KE100
- Hardware: 1.0 (EU) / Firmware: 2.4.0[1]
- Hardware: 1.0 (EU) / Firmware: 2.8.0[1]
- Hardware: 1.0 (UK) / Firmware: 2.8.0[1]

Tapo devices

All Tapo devices require authentication.
Hub-Connected Devices may work across TAPO/KASA branded hubs even if they don’t work across the native apps.